This dataset is a compilation of results obtained from vegetation surveys in the Stalybride estate moorlands (commonly known as the Saddleworth moors) following a wildfire in 2018. Ten plots were established in October 2018 at the post-fire site which were 10 m x 10 m in size. Five plots were identified as suffering a less severe (shallow) burn. The other 5 plots were in areas where a more severe (deep) burn. In all plots the surface vegetation had been removed by the fire exposing the bare peat. The data file contains: (1) On-site post-fire vegetation data – species ID and coverage, and (2) species presence in the one-year post-fire seed bank. The dataset is the result of research in the light of an NERC Urgency grant entitled 'RECOUP-Moor: Restoring Ecosystem CarbOn Uptake of Post-fire Moorland' (NE/S011943/1, led by Dr. Bjorn Robroek of the University of Southampton (now Radboud University Nijmegen, the Netherlands). Full details about this dataset can be found at https://doi.org/10.5285/56561ed3-55d0-454c-a6b9-7e633ccf9647

The dataset details individual species bioturbation potential (BPi) across 6 intertidal sites in the winter and summer of 2013. The data provide an index of bioturbation potential of individual invertebrate species present within the top 10cm of sediment. Three sites were located in Essex, South East England and the other three in Morecambe Bay, North West England. Each site consisted of a saltmarsh habitat and adjacent mudflat habitat. 22 sampling quadrats were placed in each habitat covering four spatial scales. three replicate cores of sediment were collected at each quadrat. They were sieved on a 0.5mm mesh and the macrofauna was removed, identified to species (or appropriate taxon) and individuals were identified to species (or most appropriate taxon), counted and weighed. The resulting abundance and biomass data were then used to calculate BPi of each individual species present within a sample. BPi data for mudflat habitats across Essex and Morecambe are complete, however, saltmarsh data is only available for one full Essex site (Tillingham Marsh), in one season (winter) and across all sites, at the 1m scale. This data was collected as part of Coastal Biodiversity and Ecosystem Service Sustainability (CBESS). The project was funded with support from the Biodiversity and Ecosystem Service Sustainability (BESS) programme. BESS is a six-year programme (2011-2017) funded by the UK Natural Environment Research Council (NERC) and the Biotechnology and Biological Sciences Research Council (BBSRC) as part of the UK's Living with Environmental Change (LWEC) programme. Full details about this dataset can be found at https://doi.org/10.5285/897d03de-f88c-46b8-a2ab-e6899d39f4f8

The dataset details population bioturbation potential (BPp) across 6 intertidal sites in the winter and summer of 2013. The data provide an index of bioturbation potential of invertebrate species populations present within the top 10cm of sediment. Three sites were located in Essex, South East England and the other 3 in Morecambe Bay, North West England. Each site consisted of a saltmarsh habitat and adjacent mudflat habitat. 22 sampling quadrats were placed in each habitat covering 4 spatial scales. 3 replicate cores of sediment were collected at each quadrat. They were sieved on a 0.5mm mesh and the macrofauna was removed, identified to species (or appropriate taxon) and individuals were identified to species (or most appropriate taxon), counted and weighed. The resulting abundance and biomass data were then used to calculate BPp of each individual species present within a sample. BPp data for mudflat habitats across Essex and Morecambe are complete, however, saltmarsh data is only available for one full Essex site (Tillingham Marsh), in one season (winter) and across all sites, at the 1m scale. This data was collected as part of Coastal Biodiversity and Ecosystem Service Sustainability (CBESS): NE/J015644/1. The project was funded with support from the Biodiversity and Ecosystem Service Sustainability (BESS) programme. BESS is a six-year programme (2011-2017) funded by the UK Natural Environment Research Council (NERC) and the Biotechnology and Biological Sciences Research Council (BBSRC) as part of the UK's Living with Environmental Change (LWEC) programme. Full details about this dataset can be found at https://doi.org/10.5285/6d06122c-c856-4127-b7a5-34059d0e48e7

The dataset details total abundance (TA), total biomass (TB), species richness (SR) and evenness (J) [all based on abundance and biomass] and community bioturbation potential (BPc) across six intertidal sites in the winter and summer of 2013. The data provide metrics relating to the macrofaunal communities present within the top 10cm of sediment. Three sites were located in Essex, South East England and the other three in Morecambe Bay, North West England. Each site consisted of a saltmarsh habitat and adjacent mudflat habitat. 22 sampling quadrats were placed in each habitat covering four spatial scales. Three replicate cores of sediment were collected at each quadrat. They were sieved on a 0.5mm mesh and the macrofauna was removed, identified to species (or appropriate taxon) and individuals were identified to species (or most appropriate taxon), counted and weighed. The resulting abundance and biomass data were then used to calculate TA, TB, SR, J (based on abundance and biomass) and BPc. The data for mudflat habitats across Essex and Morecambe are complete, however, saltmarsh data is only available for one full Essex site (Tillingham Marsh), in one season (Winter) and across all sites, at the 1m scale. This data was collected as part of Coastal Biodiversity and Ecosystem Service Sustainability (CBESS): NE/J015644/1. The project was funded with support from the Biodiversity and Ecosystem Service Sustainability (BESS) programme. BESS is a six-year programme (2011-2017) funded by the UK Natural Environment Research Council (NERC) and the Biotechnology and Biological Sciences Research Council (BBSRC) as part of the UK's Living with Environmental Change (LWEC) programme. Full details about this dataset can be found at https://doi.org/10.5285/f7bad4d2-aef2-4db6-be34-adbe185b88c3

The dataset details macrofaunal biomass across 6 intertidal sites in the winter and summer of 2013. The data provide a quantitative measure of the biomass of individual invertebrate species present within the top 10cm of sediment. Three sites were located in Essex, South East England and the other 3 in Morecambe Bay, North West England. Each site consisted of a saltmarsh habitat and adjacent mudflat habitat. 22 sampling quadrats were placed in each habitat covering 4 spatial scales. 3 replicate cores of sediment were collected at each quadrat. They were sieved on a 0.5mm mesh and the macrofauna was removed, identified to species (or appropriate taxon) and individuals of each species weighed. Values for macrofaunal biomass are expressed as grams per square metre of sediment. Biomass data for mudflat habitats across Essex and Morecambe are complete, however, saltmarsh data is only available for one full Essex site (Tillingham Marsh), in one season (winter) and across all sites, at the 1m scale. This data was collected as part of Coastal Biodiversity and Ecosystem Service Sustainability (CBESS): NE/J015644/1. The project was funded with support from the Biodiversity and Ecosystem Service Sustainability (BESS) programme. BESS is a six-year programme (2011-2017) funded by the UK Natural Environment Research Council (NERC) and the Biotechnology and Biological Sciences Research Council (BBSRC) as part of the UK's Living with Environmental Change (LWEC) programme. Full details about this dataset can be found at https://doi.org/10.5285/0990858a-facc-47c5-bfbe-58fa30431db8

The dataset details macrofaunal abundance across 6 intertidal sites in the winter and summer of 2013. The data provide a quantitative measure of the invertebrate species present within the top 10cm of sediment. Three sites were located in Essex, South East England and the other 3 in Morecambe Bay, North West England. Each site consisted of a saltmarsh habitat and adjacent mudflat habitat. 22 sampling quadrats were placed in each habitat covering 4 spatial scales. 3 replicate cores of sediment were collected at each quadrat. They were sieved on a 0.5mm mesh and the macrofauna was removed, identified to species (or appropriate taxon) and individuals counted. Values for macrofaunal abundance are expressed as number of individuals per square metre of sediment. Abundance data for mudflat habitats across Essex and Morecambe are complete, however, saltmarsh data is only available for one full Essex site (Tillingham Marsh), in one season (winter) and across all sites, but only at the 1m scale. This data was collected as part of Coastal Biodiversity and Ecosystem Service Sustainability (CBESS): NE/J015644/1. The project was funded with support from the Biodiversity and Ecosystem Service Sustainability (BESS) programme. BESS is a six-year programme (2011-2017) funded by the UK Natural Environment Research Council (NERC) and the Biotechnology and Biological Sciences Research Council (BBSRC) as part of the UK's Living with Environmental Change (LWEC) programme. Full details about this dataset can be found at https://doi.org/10.5285/d5317679-449f-4829-9caf-39973fe27c07

The dataset details organic carbon content of sediments across 6 intertidal sites in the winter and summer of 2013. The data provide a quantitative measure of the organic carbon present within surface sediments (up to a depth of 2 cm). Three sites were located in Essex, South East England and the other 3 in Morecambe Bay, North West England. Each site consisted of a saltmarsh habitat and adjacent mudflat habitat. 22 sampling quadrats were placed in each habitat covering 4 spatial scales. 3 replicate samples of surface sediment were collected at each quadrat. They were then processed for organic carbon content using the Loss on Ignition method (detailed below) Values are expressed as a percentage of the total sample collected. This data was collected as part of Coastal Biodiversity and Ecosystem Service Sustainability (CBESS): NE/J015644/1. The project was funded with support from the Biodiversity and Ecosystem Service Sustainability (BESS) programme. BESS is a six-year programme (2011-2017) funded by the UK Natural Environment Research Council (NERC) and the Biotechnology and Biological Sciences Research Council (BBSRC) as part of the UK's Living with Environmental Change (LWEC) programme. Full details about this dataset can be found at https://doi.org/10.5285/d4e9f0f7-637a-4aa4-b9df-2a4ca5bfaded

The dataset details particle size of sediments across six intertidal sites in the winter and summer of 2013. The data provide a quantitative measure of the sediment particle size fractions present within surface sediments (up to a depth of 2 cm). Three sites were located in Essex, South East England and the other 3 in Morecambe Bay, North West England. Each site consisted of a saltmarsh habitat and adjacent mudflat habitat. 22 sampling quadrats were placed in each habitat covering four spatial scales. three replicate samples of surface sediment were collected at each quadrat. They were then processed using laser particle size analysis. Values are expressed as different metrics of particle size and as specified size fractions as percentages of the total. This data was collected as part of Coastal Biodiversity and Ecosystem Service Sustainability (CBESS): NE/J015644/1. The project was funded with support from the Biodiversity and Ecosystem Service Sustainability (BESS) programme. BESS is a six-year programme (2011-2017) funded by the UK Natural Environment Research Council (NERC) and the Biotechnology and Biological Sciences Research Council (BBSRC) as part of the UK's Living with Environmental Change (LWEC) programme. Full details about this dataset can be found at https://doi.org/10.5285/4e6a2e58-6916-4212-8b2e-e30942b0a05a

Broadband data collected at the equatorial Mid-Atlantic Ridge from March 2016 to March 2017. From the Grant abstract: We will systematically image the entire length of an oceanic plate, from its birth at the Mid Atlantic Ridge to its oldest formation on the African margin. This is a large-scale focused effort with multiple scales of resolution and sensitivity, from a metre to kilometre scale using seismic and electromagnetic methods. This scale, focus, and interdisciplinary approach will finally determine the processes and properties that make a plate strong and define it. The project will be accomplished through a large, focused international collaboration that involves EU partners (3.5 M euro) and industry (6.4M euro), both already funded.

In this urgency proposal we will deploy seismometers for 1 year to record aftershocks from sequence of 4 major earthquakes with magnitudes between 7.1-7.6. These recordings and other recordings of earthquakes from around the globe will allow us to delineate with high accuracy the plate interfaces of the new and old subducting slabs and image the slab structures at depth. The structure of the old and new subduction zones will illuminate the processes occurring at depth which are shifting the force balance in the region to reverse the sense of subduction. The proposed experiment will be enhanced by concurrent studies scheduled to be deployed in Fall of 2014, which includes a multimillion pound ocean bottom seismic deployment by colleagues in Japan. The combined array will allow us to image the Pacific plate which is stalling the subduction, allowing us to investigate what conditions are necessary for a plate to halt the descent of the slab into the mantle. Thus we will be able to understand how subduction stops and starts. Data available online at the Incorporated Research Institutions for Seismology (IRIS) Data Management Centre (DMC).